dmesg - Intel Core i5-6600K - Intel Sky Lake - MSI Z170A
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.3.0-999-generic (kernel@tangerine) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) ) #201510072200 SMP Thu Oct 8 02:02:15 UTC 2015
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: xstate_offset[3]: 03c0, xstate_sizes[3]: 0040
x86/fpu: xstate_offset[4]: 0400, xstate_sizes[4]: 0040
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
x86/fpu: Enabled xstate features 0x1f, context size is 0x440 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000047dcffff] usable
BIOS-e820: [mem 0x0000000047dd0000-0x0000000047dd0fff] ACPI NVS
BIOS-e820: [mem 0x0000000047dd1000-0x0000000047dfafff] reserved
BIOS-e820: [mem 0x0000000047dfb000-0x0000000047e47fff] usable
BIOS-e820: [mem 0x0000000047e48000-0x00000000484c0fff] reserved
BIOS-e820: [mem 0x00000000484c1000-0x000000004e08afff] usable
BIOS-e820: [mem 0x000000004e08b000-0x000000004e15ffff] reserved
BIOS-e820: [mem 0x000000004e160000-0x000000004e349fff] usable
BIOS-e820: [mem 0x000000004e34a000-0x000000004eb17fff] ACPI NVS
BIOS-e820: [mem 0x000000004eb18000-0x000000004f399fff] reserved
BIOS-e820: [mem 0x000000004f39a000-0x000000004f3fdfff] type 20
BIOS-e820: [mem 0x000000004f3fe000-0x000000004f3fefff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000046effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi: ESRT=0x4f396018 ACPI=0x4e74e000 ACPI 2.0=0x4e74e000 SMBIOS=0xf05e0 SMBIOS 3.0=0x4f25e000 MPS=0xfca30
esrt: Reserving ESRT space from 0x000000004f396018 to 0x000000004f396050.
SMBIOS 3.0.0 present.
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x46f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 0060000000 mask 7FE0000000 uncachable
2 base 0050000000 mask 7FF0000000 uncachable
3 base 004F800000 mask 7FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x4f3ff max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcd00-0x000fcd0f] mapped at [ffff8800000fcd00]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02ff9000, 0x02ff9fff] PGTABLE
BRK [0x02ffa000, 0x02ffafff] PGTABLE
BRK [0x02ffb000, 0x02ffbfff] PGTABLE
init_memory_mapping: [mem 0x46ee00000-0x46effffff]
[mem 0x46ee00000-0x46effffff] page 2M
BRK [0x02ffc000, 0x02ffcfff] PGTABLE
init_memory_mapping: [mem 0x460000000-0x46edfffff]
[mem 0x460000000-0x46edfffff] page 2M
init_memory_mapping: [mem 0x440000000-0x45fffffff]
[mem 0x440000000-0x45fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x47dcffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x47bfffff] page 2M
[mem 0x47c00000-0x47dcffff] page 4k
init_memory_mapping: [mem 0x47dfb000-0x47e47fff]
[mem 0x47dfb000-0x47e47fff] page 4k
BRK [0x02ffd000, 0x02ffdfff] PGTABLE
init_memory_mapping: [mem 0x484c1000-0x4e08afff]
[mem 0x484c1000-0x485fffff] page 4k
[mem 0x48600000-0x4dffffff] page 2M
[mem 0x4e000000-0x4e08afff] page 4k
BRK [0x02ffe000, 0x02ffefff] PGTABLE
init_memory_mapping: [mem 0x4e160000-0x4e349fff]
[mem 0x4e160000-0x4e349fff] page 4k
init_memory_mapping: [mem 0x4f3fe000-0x4f3fefff]
[mem 0x4f3fe000-0x4f3fefff] page 4k
init_memory_mapping: [mem 0x100000000-0x43fffffff]
[mem 0x100000000-0x43fffffff] page 1G
RAMDISK: [mem 0x33fec000-0x35fedfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000004E74E000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000004E74E0A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000004E770650 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000004E74E208 022447 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x000000004EB17F80 000040
ACPI: APIC 0x000000004E770760 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000004E7707E8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000004E770830 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000004E7708D0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x000000004E770910 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
ACPI: SSDT 0x000000004E770948 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: LPIT 0x000000004E770CB8 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000004E770D50 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
ACPI: SSDT 0x000000004E770F98 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
ACPI: SSDT 0x000000004E773B48 000C45 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
ACPI: DBGP 0x000000004E774790 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x000000004E7747C8 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000004E774820 000618 (v02 INTEL xh_rvp08 00000000 INTL 20120913)
ACPI: SSDT 0x000000004E774E38 005318 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x000000004E77A150 000042 (v01 00000000 00000000)
ACPI: SSDT 0x000000004E77A198 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: DMAR 0x000000004E77AFF0 00011C (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: NHLT 0x000000004E77B110 001770 (v00 INTEL EDK2 00000002 01000013)
ACPI: TPM2 0x000000004E77C880 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
ACPI: BGRT 0x000000004E77C8B8 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000046effffff]
NODE_DATA(0) allocated [mem 0x46eff6000-0x46effafff]
[ffffea0000000000-ffffea0011bfffff] PMD -> [ffff88045f600000-ffff88046e5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000046effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x0000000047dcffff]
node 0: [mem 0x0000000047dfb000-0x0000000047e47fff]
node 0: [mem 0x00000000484c1000-0x000000004e08afff]
node 0: [mem 0x000000004e160000-0x000000004e349fff]
node 0: [mem 0x000000004f3fe000-0x000000004f3fefff]
node 0: [mem 0x0000000100000000-0x000000046effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000046effffff]
On node 0 totalpages: 3918703
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 4912 pages used for memmap
DMA32 zone: 314322 pages, LIFO batch:31
Normal zone: 56256 pages used for memmap
Normal zone: 3600384 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x50000000-0x8fffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x47dd0000-0x47dd0fff]
PM: Registered nosave memory: [mem 0x47dd1000-0x47dfafff]
PM: Registered nosave memory: [mem 0x47e48000-0x484c0fff]
PM: Registered nosave memory: [mem 0x4e08b000-0x4e15ffff]
PM: Registered nosave memory: [mem 0x4e34a000-0x4eb17fff]
PM: Registered nosave memory: [mem 0x4eb18000-0x4f399fff]
PM: Registered nosave memory: [mem 0x4f39a000-0x4f3fdfff]
PM: Registered nosave memory: [mem 0x4f3ff000-0x4fffffff]
PM: Registered nosave memory: [mem 0x50000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88046ec00000 s97240 r8192 d29736 u524288
pcpu-alloc: s97240 r8192 d29736 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 3857445
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 15218676K/15674812K available (7907K kernel code, 1265K rwdata, 3896K rodata, 1460K init, 1300K bss, 456136K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1024 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: PIT calibration matches HPET. 2 loops
tsc: Detected 3503.920 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7007.84 BogoMIPS (lpj=14015680)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150818
ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20150818/dswload-210)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20150818/psobject-227)
ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20150818/tbxfload-193)
ACPI Error: 1 table load failures, 7 successful (20150818/tbxfload-214)
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81eab000 - ffffffff81eb2000)
ftrace: allocating 31195 entries in 122 pages
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000004e0c2000 end: 0x0000004e0e1fff
DMAR: RMRR base: 0x0000004f800000 end: 0x0000008fffffff
DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
DMAR: ANDD device: 9 name: \_SB.PCI0.UA00
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (28031.36 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x47dd0000-0x47dd0fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x4e34a000-0x4eb17fff] (8183808 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 14:23:38, date: 10/09/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 21 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045C950C00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045C8B2000 000705 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045C8B2800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045C89FE00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xdf353000-0xdf353fff 64bit]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf330000-0xdf33ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.1: [8086:a130] type 00 class 0x0c03fe
pci 0000:00:14.1: reg 0x10: [mem 0xdf000000-0xdf1fffff 64bit]
pci 0000:00:14.1: reg 0x18: [mem 0xdf352000-0xdf352fff 64bit]
pci 0000:00:14.1: PME# supported from D0 D3hot
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf351000-0xdf351fff 64bit]
pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0xdf350000-0xdf350fff 64bit]
pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
pci 0000:00:15.1: reg 0x10: [mem 0xdf34f000-0xdf34ffff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf34e000-0xdf34efff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf348000-0xdf349fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf34d000-0xdf34d0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf34c000-0xdf34c7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:a11a] type 01 class 0x060400
pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:a127] type 00 class 0x118000
pci 0000:00:1e.0: reg 0x10: [mem 0xdf34b000-0xdf34bfff 64bit]
pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf344000-0xdf347fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf340000-0xdf343fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf320000-0xdf32ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf34a000-0xdf34a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdf300000-0xdf31ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xdf200000-0xdf207fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1b21:1080] type 01 class 0x060400
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.2: PCI bridge to [bus 05-06]
pci 0000:05:00.0: PCI bridge to [bus 06]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x47dd0000-0x47ffffff]
e820: reserve RAM buffer [mem 0x47e48000-0x47ffffff]
e820: reserve RAM buffer [mem 0x4e08b000-0x4fffffff]
e820: reserve RAM buffer [mem 0x4e34a000-0x4fffffff]
e820: reserve RAM buffer [mem 0x4f3ff000-0x4fffffff]
e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a0f] has been reserved
system 00:00: [io 0x0a10-0x0a1f] has been reserved
system 00:00: [io 0x0a20-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0x1800-0x18fe] could not be reserved
system 00:03: [io 0x164e-0x164f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0800-0x087f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:00:1d.2: PCI bridge to [bus 05-06]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:03: resource 1 [mem 0xdf200000-0xdf2fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32776K (ffff880033fec000 - ffff880035fee000)
DMAR: ACPI device "device:72" under DMAR at fed91000 as 00:15.0
DMAR: ACPI device "device:73" under DMAR at fed91000 as 00:15.1
DMAR: ACPI device "device:74" under DMAR at fed91000 as 00:1e.0
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x43bfa000-0x47bfa000] (64MB) mapped at [ffff880043bfa000-ffff880047bf9fff]
microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x1b
microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x1b
microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x1b
microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x1b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1444400618.632:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90001c00000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.3.0-999-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.3.0-999-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.3.0-999-generic xhci-hcd
usb usb3: SerialNumber: 0000:03:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.3.0-999-generic xhci-hcd
usb usb4: SerialNumber: 0000:03:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
intel_pstate: HWP enabled
intel_pstate: HWP enabled
intel_pstate: HWP enabled
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: e568bf335c0ff00a040ab443dd4cdb4638effd43'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 3:9:384
usb usb2: hash matches
rtc_cmos 00:05: setting system clock to 2015-10-09 14:23:39 UTC (1444400619)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1460K (ffffffff81d3e000 - ffffffff81eab000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 272K (ffff8800027bc000 - ffff880002800000)
Freeing unused kernel memory: 200K (ffff880002bce000 - ffff880002c00000)
random: systemd-udevd urandom read with 1 bits of entropy available
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
hidraw: raw HID events driver (C) Jiri Kosina
ahci 0000:00:17.0: version 3.0
[drm] Initialized drm 1.1.0 20060810
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf34c000 port 0xdf34c100 irq 321
ata2: SATA max UDMA/133 abar m2048@0xdf34c000 port 0xdf34c180 irq 321
ata3: SATA max UDMA/133 abar m2048@0xdf34c000 port 0xdf34c200 irq 321
ata4: SATA max UDMA/133 abar m2048@0xdf34c000 port 0xdf34c280 irq 321
ata5: SATA max UDMA/133 abar m2048@0xdf34c000 port 0xdf34c300 irq 321
ata6: SATA max UDMA/133 abar m2048@0xdf34c000 port 0xdf34c380 irq 321
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb 1-2: new high-speed USB device number 2 using xhci_hcd
usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
e1000e 0000:00:1f.6 eth0: registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) d8:cb:8a:9a:f3:14
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[drm] Memory usable by graphics device = 4096M
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ata4: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: TS256GSSD370S, N1114H, max UDMA/133
ata2.00: 500118192 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA TS256GSSD370S 4H PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
[drm] failed to retrieve link info, disabling eDP
------------[ cut here ]------------
WARNING: CPU: 3 PID: 135 at /home/kernel/COD/linux/drivers/gpu/drm/i915/intel_pm.c:3321 skl_update_pipe_wm+0x71b/0x7c0 [i915]()
WARN_ON(p->pixel_rate == 0)
Modules linked in:
mxm_wmi i915(+) i2c_algo_bit psmouse e1000e drm_kms_helper syscopyarea ptp sysfillrect pps_core sysimgblt fb_sys_fops ahci drm libahci i2c_hid hid wmi video pinctrl_sunrisepoint pinctrl_intel fjes
CPU: 3 PID: 135 Comm: systemd-udevd Not tainted 4.3.0-999-generic #201510072200
Hardware name: MSI MS-7984/Z170A GAMING PRO (MS-7984), BIOS 1.00 07/14/2015
ffffffffc029c1f0 ffff880456b4b418 ffffffff813a632d ffff880456b4b460
ffff880456b4b450 ffffffff8107a586 ffff880456b4b726 ffff880455e49a26
0000000000000008 ffff880456b4b730 ffff880456b4b628 ffff880456b4b4b0
Call Trace:
[] dump_stack+0x44/0x57
[] warn_slowpath_common+0x86/0xc0
[] warn_slowpath_fmt+0x4c/0x50
[] ? ep_poll_callback+0x115/0x160
[] skl_update_pipe_wm+0x71b/0x7c0 [i915]
[] skl_update_wm+0x190/0x810 [i915]
[] ? __wake_up_common+0x55/0x90
[] skl_update_sprite_wm+0x94/0x100 [i915]
[] intel_update_sprite_watermarks+0x32/0x40 [i915]
[] skl_disable_plane+0xbf/0xd0 [i915]
[] intel_modeset_setup_hw_state+0x3b3/0xdd0 [i915]
[] intel_modeset_init+0x9aa/0x1240 [i915]
[] ? drm_irq_install+0xba/0x170 [drm]
[] i915_driver_load+0x7cf/0xe90 [i915]
[] ? netlink_broadcast_filtered+0x138/0x3e0
[] ? cleanup_uevent_env+0x10/0x10
[] ? kobject_uevent_env+0x15f/0x660
[] ? get_device+0x17/0x20
[] ? klist_class_dev_get+0x15/0x20
[] ? klist_node_init+0x38/0x50
[] ? klist_add_tail+0x20/0x50
[] ? device_add+0x270/0x600
[] drm_dev_register+0xa7/0xb0 [drm]
[] drm_get_pci_dev+0x8f/0x1f0 [drm]
[] i915_pci_probe+0x34/0x50 [i915]
[] local_pci_probe+0x45/0xa0
[] pci_device_probe+0xe1/0x130
[] driver_probe_device+0x21b/0x460
[] __driver_attach+0x85/0x90
[] ? driver_probe_device+0x460/0x460
[] bus_for_each_dev+0x5d/0x90
[] driver_attach+0x1e/0x20
[] bus_add_driver+0x1d0/0x290
[] driver_register+0x60/0xe0
[] __pci_register_driver+0x4c/0x50
[] drm_pci_init+0xe0/0x110 [drm]
[] ? 0xffffffffc02ea000
[] i915_init+0xa6/0xad [i915]
[] do_one_initcall+0xcd/0x1f0
[] ? kmem_cache_alloc_trace+0x17f/0x1f0
[] ? do_init_module+0x27/0x1e8
[] do_init_module+0x60/0x1e8
[] load_module+0x138d/0x1a70
[] ? __symbol_put+0x40/0x40
[] SyS_finit_module+0x80/0xb0
[] entry_SYSCALL_64_fastpath+0x16/0x75
---[ end trace 3cc06aafede25b19 ]---
[drm:drm_calc_timestamping_constants [drm]] *ERROR* crtc 21: Can't calculate constants, dotclock = 0!
usb 1-11: new full-speed USB device number 3 using xhci_hcd
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0f: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915 1.6.0 20150731 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 1-11: New USB device found, idVendor=067b, idProduct=2303
usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-11: Product: USB-Serial Controller D
usb 1-11: Manufacturer: Prolific Technology Inc.
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 1-2.3: new low-speed USB device number 4 using xhci_hcd
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 1-2.3: New USB device found, idVendor=04f2, idProduct=0833
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Keyboard
usb 1-2.3: Manufacturer: CHICONY
usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-2.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
systemd[1]: Created slice Root Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Started Read required files in advance.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Started Braille Device Support.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
tsc: Refined TSC clocksource calibration: 3503.996 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32820fce838, max_idle_ns: 440795321409 ns
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Journal Service.
lp0: using parport0 (polling).
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[252]: Received request to flush runtime journal from PID 1
resource sanity check: requesting [mem 0xfed40040-0xfed4103f], which spans more than MSFT0101:00 [mem 0xfed40000-0xfed4087f]
------------[ cut here ]------------
WARNING: CPU: 3 PID: 333 at /home/kernel/COD/linux/arch/x86/mm/ioremap.c:198 __ioremap_caller+0x2a2/0x360()
Info: mapping multiple BARs. Your kernel is fine.
Modules linked in:
tpm_crb(+) acpi_pad acpi_als mac_hid kfifo_buf industrialio parport_pc ppdev lp parport autofs4 mxm_wmi i915 i2c_algo_bit psmouse e1000e drm_kms_helper syscopyarea ptp sysfillrect pps_core sysimgblt fb_sys_fops ahci drm libahci i2c_hid hid wmi video pinctrl_sunrisepoint pinctrl_intel fjes
CPU: 3 PID: 333 Comm: systemd-udevd Tainted: G W 4.3.0-999-generic #201510072200
Hardware name: MSI MS-7984/Z170A GAMING PRO (MS-7984), BIOS 1.00 07/14/2015
ffffffff81aaaa58 ffff880456077a20 ffffffff813a632d ffff880456077a68
ffff880456077a58 ffffffff8107a586 ffffc90001bd4040 ffffc90001bd4040
0000000000001000 ffff880459836ec0 0000000000000040 ffff880456077ab8
Call Trace:
[] dump_stack+0x44/0x57
[] warn_slowpath_common+0x86/0xc0
[] warn_slowpath_fmt+0x4c/0x50
[] ? iomem_map_sanity_check+0xbc/0xd0
[] __ioremap_caller+0x2a2/0x360
[] ioremap_nocache+0x17/0x20
[] devm_ioremap_nocache+0x3d/0x80
[] crb_acpi_add+0xf3/0x28b [tpm_crb]
[] acpi_device_probe+0x4a/0xf7
[] driver_probe_device+0x21b/0x460
[] __driver_attach+0x85/0x90
[] ? driver_probe_device+0x460/0x460
[] bus_for_each_dev+0x5d/0x90
[] driver_attach+0x1e/0x20
[] bus_add_driver+0x1d0/0x290
[] ? 0xffffffffc0089000
[] driver_register+0x60/0xe0
[] acpi_bus_register_driver+0x3b/0x43
[] crb_acpi_driver_init+0x10/0x1000 [tpm_crb]
[] do_one_initcall+0xcd/0x1f0
[] ? __vunmap+0x9e/0xf0
[] ? kmem_cache_alloc_trace+0x17f/0x1f0
[] ? do_init_module+0x27/0x1e8
[] do_init_module+0x60/0x1e8
[] load_module+0x138d/0x1a70
[] ? __symbol_put+0x40/0x40
[] SyS_finit_module+0x80/0xb0
[] entry_SYSCALL_64_fastpath+0x16/0x75
---[ end trace 3cc06aafede25b1a ]---
tpm_crb MSFT0101:00: ioremap of the command buffer failed
tpm_crb: probe of MSFT0101:00 failed with error -12
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol BCM registered
Bluetooth: HCI UART protocol QCA registered
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
idma64 idma64.0: Found Intel integrated DMA 64-bit
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
idma64 idma64.1: Found Intel integrated DMA 64-bit
intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
idma64 idma64.2: Found Intel integrated DMA 64-bit
Adding 15675388k swap on /dev/sda3. Priority:-1 extents:1 across:15675388k SSFS
random: nonblocking pool is initialized
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
dwc3-pci 0000:00:14.1: enabling device (0000 -> 0002)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:04F2:0833.0001/input/input17
dw-apb-uart.2: ttyS4 at MMIO 0xdf34b000 (irq = 20, base_baud = 115200) is a 16550A
audit: type=1400 audit(1444400620.808:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=539 comm="apparmor_parser"
audit: type=1400 audit(1444400620.808:3): apparmor="STATUS" operation="profile_load" name="chromium" pid=539 comm="apparmor_parser"
audit: type=1400 audit(1444400620.812:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=539 comm="apparmor_parser"
audit: type=1400 audit(1444400620.812:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=539 comm="apparmor_parser"
audit: type=1400 audit(1444400620.812:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=539 comm="apparmor_parser"
audit: type=1400 audit(1444400620.812:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=539 comm="apparmor_parser"
audit: type=1400 audit(1444400620.820:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=539 comm="apparmor_parser"
audit: type=1400 audit(1444400620.820:9): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=539 comm="apparmor_parser"
audit: type=1400 audit(1444400620.820:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=539 comm="apparmor_parser"
hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-2.3/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:04F2:0833.0002/input/input18
hid-generic 0003:04F2:0833.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-2.3/input1
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 5
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
xhci-hcd xhci-hcd.1.auto: Host not halted after 16000 microseconds.
xhci-hcd xhci-hcd.1.auto: can't setup: -110
xhci-hcd xhci-hcd.1.auto: USB bus 5 deregistered
xhci-hcd: probe of xhci-hcd.1.auto failed with error -110
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
usb 1-2.4: new full-speed USB device number 5 using xhci_hcd
clocksource: Switched to clocksource tsc
usb 1-2.4: New USB device found, idVendor=1532, idProduct=0101
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: Razer Copperhead Laser Mouse
usb 1-2.4: Manufacturer: Razer
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:1532:0101.0003/input/input19
hid-generic 0003:1532:0101.0003: input,hidraw2: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-2.4/input0
[drm] RC6 on
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:1532:0101.0004/input/input20
hid-generic 0003:1532:0101.0004: input,hidraw3: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-2.4/input1
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver pl2303
pl2303 1-11:1.0: pl2303 converter detected
usb 1-11: pl2303 converter now attached to ttyUSB0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
show_signal_msg: 27 callbacks suppressed
Thunar[1133]: segfault at ffffffffffffffff ip 00007fae9c378d96 sp 00007ffc2a446660 error 5 in libgio-2.0.so.0.4600.0[7fae9c2a9000+17a000]
usb 1-11: USB disconnect, device number 3
pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
pl2303 1-11:1.0: device disconnected
usb 1-11: new full-speed USB device number 6 using xhci_hcd
usb 1-11: New USB device found, idVendor=067b, idProduct=2303
usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-11: Product: USB-Serial Controller D
usb 1-11: Manufacturer: Prolific Technology Inc.
pl2303 1-11:1.0: pl2303 converter detected
usb 1-11: pl2303 converter now attached to ttyUSB0